Cookie Img
Send Inquiry Send SMS    Call Me Free

Although the company was started in 2000, but we hold more than 24 years of experience in this business line. Our mentor and the Director of the company, has been partner in different companies. He was business partner in PIO TECH, Indore (1982-1985) and director in Luminairs and Switchgears Pvt. Ltd., Indore (1985- 1987). He has also been associated with M/s Deepcon Electricals And Projects, Bhopal, as a business partner. Now, the company Deepcon Electricals and Projects has been taken over by M/s Juhi Electricals & Projects. It is our mentor's market knowledge and expertise that empowers us to serve the best electrical products to our clients. He is a graduate in electrical engineering from A.M.U. Through his experience, he guides the team to perform well and deliver a matchless range of products in market. Over the years, we have completed several projects successfully. Clients trust us and approach us time & again for availing our products.

Our Clients:

  • Central Railway
  • Indian Institute Of Forest Management, Bhopal
  • Sports Authority Of India Training Centre, Bhopal
  • Central Institute Of Plastics Engineering & Technology
  • B.H.E.L., Bhopal
  • Alm.P. Housing Board
  • M.P.S.E.B.,Bhopal
  • Capital Project Administration (CPA), Bhopal (M.P.)
  • State Bank Of India L.H.O., Bhopal
  • Bank Of India
  • All India Radio Madhya Pradesh
  • Rajya Sahakari Bank Ircon Bhopal (FOR Mes, Bhopal)
Our Infrastructure

Our state-of-the-art infrastructure supports us in fulfilling clients' demands in an optimum manner. Spread up in the area of 20,000 sq.ft, our factory has different units like production, warehouse, quality testing and product delivery. All these units function in an efficient manner and enable us to release an unparalleled range of electrical products in market.
Some of the machines and equipment, installed at our factory are:
  • Plazma Cnc Profile Cutting Machine 1mm To 40mm Thickness - 1 No.
  • Power Press 80 Ton Capacity - 1 No.
  • Power Shearing Machine Cap.- 2540x5mm â€Â“ 1 No.
  • Power Press 30 Ton Capacity - 2 No.
  • Hand Shearing Machine - 3 No.
  • Arc Welding Machine - 3 No.
  • Co2 Welding Machine - 1 No.
  • Gas Welding Machine - 1 No
  • Powder Coating Eqp. & Oven - 1 No.
  • Compressor For Painting - 2 No.
  • Electric Oven 2.4m (L)x2.4M(H)x1.2M(W) - 2 No.
  • Portable Drill Machine - 3 No.
  • Padastal Drill Machine - 3 No.
  • Bench Grinder - 2 No.
  • Surface Grinder - 4 No.
  • Hoist 3 Ton . - 1 No.
  • Trifor 3 Ton - 1 No.
  • Angle, Pipe & Channel Cutting M/C â€Â“ 1no
  • High Voltage Testing Kit Upto 70 Kv - 1 No.
  • High Voltage Testing Kitupto 5 Kv - 1 No.
  • Insulation Tester (Megger) 1000v - 1 No.
  • Insulation Tester (Megger) 2500v - 1 No.
  • Load Testing Kit Upto 2000a - 1 No.
  • Primary Injection Kit To Test Relays - 1 No.
Our Products

We are manufacturing, supplying and trading:
  • PCC Panel
  • Motor Control Centers
  • Auto Power Factor Correction Panel
  • 11/33KV,VCB Control Panel
  • Relay Panel
  • Distribution Boards
  • Feeder Pillars Panel
  • Synchronization Panel
  • Auto Main Failure Panel
  • AMF Panel
  • Remote Control Panels
  • Auto Transformer Starters
  • Auto Slip Ring Starters
  • Street Light Time Switch Panel
  • Bus Trunks Mains
  • Rising Mains
Production Procedure Of Panel Manufacturing:

The panels are made as per the drawings, which are made by our designers. First, the profiles are made by using the sheet metal and then the sheets are cut in proper design with the assistance of sheering machine. When the process of sheet cutting is over, our team starts the process of sheet knotching with the help of power presses. After this, the sheet is folded and welded in accordance to the designs. To give the finishing touch to the products, all the welded places are grinded by taking the assistance of Grinder. The next process is the fitting of components.

Painting: First, the surface of the MS Sheets, is cleaned by using the chemical solutions. This helps us to remove grease and rust particles. Then, we rub the surface of Panel Board with the use of sand paper in order to make it smooth for the final painting. After this, we paint the panel with the use of powder paint. This whole process takes at least 8 to 10 hrs, depending on the work.

Assembling, Fitting and Wiring: In this process, all the electrical items such as, Control Gears, Electrical Grade Aluminum Bus Bars Or Copper Bus Bars, Switchgear, etc., are assembled & fitted in the Panel boards. When this process is over, the work related to wiring and connections, are done. After this, all the panel boards are checked in terms of different quality parameters like physical strength, high voltage test, durability, etc. Once the panels excel these quality testes, they are dispatched to clients.

Quality Assurance

Customer Satisfaction is our prime objective. Hence, we provide only the best grade electrical products to our customers. We make our products using modern production techniques and top-grade raw materials like MS Sheet, MS Angle, MS Channel, Powder Paint Aluminum Busbar, Push Button, Copper Busbar, Insulated Copper-Wire, Indication Lamps Meters, etc. For us, customers' opinion on our products matters. So, we welcome their suggestions for improvisation of our product range. Moreover, we also handle customers' complaints and inquiries related to our products in a professional manner. Such factors helped us to release defect-free electrical products in market.


JUHI ELECTRICALS PRIVATE LIMITED
Plot No 6/4, H-Sector Industrial Area, Govindpura, Bhopal - 462023, Madhya Pradesh, India
Phone :91-755-4284897/6532338
Fax :91-755-4284897
Mr. Mukesh Chaturvedi (Director)
Mobile :+919826063549, +919826054517, +919893094755, +918819980844
   Call Me Free Offline Send SMS Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
JUHI ELECTRICALS PRIVATE LIMITED All Rights Reserved.